Replacement Parts are available in our Partstore
Shrouded Inswing / Outswing
16 x 22″
Side mount door swings clear of work area. Pressure of liquid inside the tank provides a positive seal. Optional racking located below lover edge of door drains 90% of liquid and allows for complete door opening and inspection.
Typically used in all industries.
Flush Mount Inswing / Outswing
16 x 22″
Completely Flush interior. No cleaning shadow. Side mount available in 304 and 316L stainless steel.
Typically used in beer industry.
Oval Grainout Outswing
18 x 22″
Side mount. Available in 304 and 316L stainless steel.
Used atmospheric tanks only.
Top Outswing / Sideswing
20″, 24″
Top mount inspection manway accommodates right, left, and top hinge locations. Cool-to-touch (outdoors) high impact PVC grip knob. Hygienic dome lid and narrow cross arms allow complete wash-down, no puddles. 360 degree locations. Sideswing action for low ceiling clearance.
Typically used in all industries.
Bottom Cone
Base mount available in 304 and 316L stainless steel.
Typically used in food & beer industries.
Bubble Outswing
18″
Side mount. Available in 304 and 316L stainless steel.
Used atmospheric tanks only.
2-Arm Rectangular Horizontal Hinge
16 x 21″
Heavy-duty 7ga outswing door and wing nuts swing free and clear of opening. Stainless steel wing nut assembly for extra strength with brass-lined wing nuts to prevent galling. Double cross arm for strong seal.
Lower edge is molded to the slope of the tank for easy pomace removal and complete drainage on wine tanks.
One-Arm Rectangular Horizontal Hinge
13 x 16″
Same heavy-duty construction as the 16 x 21″ Rectangular Lid. Typically used for the Econo-Tote.
Swing Lid with Spring Assist
39″ & 48″ diameter
Top mount spring-loaded lift action for one person operation. Sideswing lid for low clearance. Needle roller thrust bearings for smooth pivot. Oversized for complete access. Available in 304 and 316L stainless steel. Slotted formed silicone O-ring gasket.
Typically used in the wine industry.
Punchable / Convertible
Removable top lid, air-tight gasket, full access to cap.
Foating Lid
Floating lid for variable capacity storage, includes manifold assembly (pressure regulator / air hose). Optional winch assembly.
Non Sealing Lid
60″, 66″
Non-sealing lid is great for tank cover. Design includes forklift pockets for easy lift action
TCI Pressure Outswing
16″, 18″, 20″
Polished or electropolished interior finish. Sanitary gasket design. Exposed for CIP cleaning. Top and side mount available in 316L stainless steel. USP class IV elastomers available. Standard gaskets include Neoprene, Silicon, Buna, Viton and EPDM. ASME Rated.
Typically used in pharmaceutical & high tech industries.
Sanitary Pressure Outswing
20″, 24″
Polished or electropolished interior finish. 14.9 PSIG standard pressure rating. Top and side mount available in 316L stainless steel. Standard gaskets include Neoprene, Silicon, Buna, Viton and EPD. Non-ASME.
This “food-grade” manway is typically used in pharmaceutical & high tech industries.
Sanitary Hinged Lid
Available with sliding doors, removable doors, and CIP-able options as well as double half circle hatches with fixed or removable bridge.
Typically used in all industries.
